Combo Special: Tenergy TB6-B Balance Charger for NiMH/NiCD/Li-PO/Li-Fe Battery Packs + Power Supply by Tenergy
No valid json found
Product Details
|
Manufacturer
Tenergy |
Recommended Age
14 years and up |
Brand
Tenergy |
Model
90263 |
Features
- Supports multiple types of battery packs with one single charger! Handle NiMH, NICD, Li-Po,Li-ion, Li-Fe, SLA Batteries
- Various Connectors Supported:Hitech, JST, Deans,Tamiya, Traxxas
- Balance individual cells on discharge
- Battery 'Fast' and 'Storage' mode: You can charge Li-ion/Li-Polymer battery for special purposes.
- For users convenience it can store maximum 5 data of different batteries.
Description
* NiMH/NiCD 1~15 cells ( 1.2v to 18v)
* Li-PO/Lithium Ion 1~6 series ( 3.7v to 22.2v)
* Li-Fe 1~6 series
* Sealed Lead Acid (SLA)
* Charge your NiMH/NiCD Receiver Packs: 3.6v, 4.8v, 6v, or 9.6v
* Charge your LiFE Packs: 6.6v
* Charge your normal NiMH/NICD Packs: 7.2v, 8.4v, 9.6v, 10.8v, 12v
* Charge your High Performance LIPO Packs: 7.4v, 11.1v, 14.8v, 18.5v
* Charge your Airsoft NiMH/NICD Packs: 8.4v, 9.6v, 12v
* Charge your Airsoft LIPO/LiFe Packs
Future proof yourself for any new battery pack or upgrades, instead of having constantly buy 1 charger for each type of pack. Note: to charge Mini Airsoft packs, you need a Standard Tamiya to Mini Tamiya Connector which is sold separately.
Charger Specifications:
DC 11V~15V, which can be directly connect to Automobile Battery. The working electric current is less than 5A when it is charged in full load. The current of the fuse is 10A which could prevent short circuit. You can also select a extra Wall Plug AC-DC12V/5A Switching Power as a power source.
Specification
Operating voltage
DC 11~18 volts
AC 100~240V, 50/60Hz
Charge/discharge power
max. 50/5 Watts
Pb
2~20V
Charge current
0.1 to 5.0A
Discharg current
0.1 to 1.0A
No. of cycle
1 to 5 times
Dimension
130x85x33 mm<
User's setting-up parameters
Battery voltage type
LiIo:3.6V, LiPo:3.7V, LiFe:3.3V
NiCd Delta-peak voltage sensitivity
1 to 20mV
NiMH Delta-peak voltage sensitivity
1 to 20mV
Battery temperature cut-off
20 to 80C or OFF
Waiting time between charge/discharge
1 to 60 min.
Integral timer limit for safety
10 to 720 min.or OFF
Maximum charging capacity limit for safety
10 to 9990mAh or OFF
Key beep and buzzer sound
ON/OFF
Input DC power low alert
10 to 11V
###Please do NOT use this charger with any pack that doesn't have a built-in protection circuit board/module (PCB/PCM)
